My Profile

Keep Up to Date:
Blog RSS
Blog
Forum RSS
Forum

binding

...ard when you're about to fall while saving you the time and energy needed to constantly re-strap your rear bindings. Stopping Since not all slopes and trails conveniently end in a nice and flat ru...
...50. I wear size 11 boots and when I strap in my boots overhang on both the heel and toe side. I have my bindingss at 15/15 degrees and 21 inches apart O.C. If I have my bindings centered I have a...
Hi I was in a Burton shop recently (here in the Czech Republic) and saw a pair of last year's bindings on sale. They looked pretty good but had what I think is called a "speed zone" strap. It has t
...as too big. I'm still growing and wanted to buy a little big. Also I was looking at putting Custom Burton Bindings on it. Would the screws match up? Thanks for your help. Board-http://www.backcoun...
Today Im Getting: Board: Burton Deuce Binding: Burton Freestyles (2009-Yellow) [IMAGE]
What binding angles should i use for freeride?
...go to find a good deal and get good performance at a fair price, because frankly, $1000+ for board, boots, bindings is pushing it big time. *Found a couple sites that sell these boards, any opinions o...
...questions. I am 5'10" so I think I need a 162ish board. Right? If I have a chance to buy a K2 Fuse with bindings and boots (new with few $ remember?, googles and a helmet for $180 but it is only a ...
...t A Pair Of Size 11 Rome Libertine Boots And I Just Dont Think There Going To Fit On My Board I Havent Any Bindings As Yet. The Bindings I Have In Mind Are Burton FreeStyle Large. I Mean The Most Info...
When some tell me their stance is 21 inches.. from where are they measuring from? Between the bindings? Between the inner inserts? Please post.
...ils etc, and that I should get it. On the website, however, I was a little shocked by the prices of the bindings and boots. So I am wondering if there are any decent quality Bindings (yet somewha...
...oots on ebay because they were oh so cheap. I didn't realize that the clicker actually had to do with the bindings:blush: So I have "standard" bindings. Can I just use the k2's with my bindings or d...
...ouple times in his back yard when the snow was deep enough. The board is a DBX Dragon, DBX boots, and DBX bindings. I bought the entire package for $50 USD. I tried to do some research on the b...
Hello all! I have been boarding on a really old Salomon board with fairly new Rome Bindings and this year I got a new Burton board for my birthday. yeah! However the new binding system from burt
Some dudes seling some Burton Custom bindings, that use the large cloth X strap across the boot. I'm not sure what year it is, but I want some decent bindings, and these are only $45. Good deal? He
...all last year. I liked them but felt I could go for more stiffness and I bought all the stuff about strap bindings being superior to step-ins. So over the off-season, I bought a nice set of Solomon...
I'm thinking of going over to step-ins and wondered if anyone had advice? my mate loves them and is sick of waiting for me at top of lifts! I was going to try out flow but someone made the point th
how do you store snowboard w/ bindings.. during season and off season.... do you lie the snowboard down on the ground or stand it up against the wall? I heard standing it up is better for the board
...om rails and all, but nothing major. There is sticker on it that says nintendo, and it's coming off. Forum bindings are included. I'm asking $75.00 OBO, contact me if interested at jordanh_02@yahoo.co...
... me. I have moved on to carving gear so I`m getting rid of some of my freeride equipment. These boots and bindings were purchased just last January and used for 8 boarding days. They look like new w...
... Troop or Salomon Radiant. Any idea which is better or any other recommendations? Also, I like the Burton Bindings however does this mean I am limited to a burton board? Can I use a Burton binding on...
I picked up a pair of 2003 Ride Team Bindings, used to ride burton mission. Anybody have any opinions on the Team Bindings. Thanks
...m a 5'6 female, 135 lbs. Currently have an LTD board which is way too stiff for my comfort. I have Morrow bindings, but am open to purchasing new ones (I'd LOVE to get some Flow bindings, but we'll s...
...i.e. hardpack mixed with bulletproof ice) and working on my carving when I felt a little give in my front binding on a hard toe-side carve. About 2 minutes later, my front foot popped out of the bi...
...bout a year on the indoor slopes in the UK but plan to go away this winter so want to get my own board and binding so I can stop using hire boards! I am 5'11" and way about 90kgs. I am looking for...
No, the discontinued Marker/DNR/Santa Cruz stepin system are not compatible with any other manufacturers. 2000 was the last year it was made.
... I haven`t been snowboarding much in the past few years and have lost touch with the hardware. My Switch bindings were bought in 1996. I`ve been only about 10 times with my own gear. It`s still in ...
I am getting a Ride Yukon 169. On my old board, I had K2 clicker bindings and was really happy with them. Everyone is telling me that I will lose a lot of preformance with SI bindings on the Yukon.
I upgraded my boots and bindings this weekend. Previously I had: Northwave Master (top of line freeride boot), 4 years old; Drake F60 Ltd, 3 years old I`ll do the new boots first. They seem fanta
We need an alpine race carving board for my 11 year old son, plus bindings and hard boots. But the price tag for this new equipment is huge. We just can`t afford new equipment for him, not when he`l
07/08 156 K2 zepplin board burton mission bindings in white/ desert camo never been ridden. it is a amazing board test on elast year. for those who dont like the constraints of a specalized board, pe
... - finding a carving board that is the right weight and flex for him - finding a board (and boots and bindings) that we can afford. Given the prices that we`re seeing for new Alpine carve boards...
...to Voelkl (no reply yet though), but a second opinion can`t hurt :-) I am considering using Catek plate bindings on a Voelkl Cross board - would such bindings assert too much force on that particu...
Anyone know where to get Flow Bindings in Canada? The seem pretty rare. I have seen a lot of posts about best boots to go with those bindings. I would not mind some opinons. Are they worth
wats up everyone? i bought a saloman sequences 160 and salomon bindings(large) last season. i got dc boots size 10 or 10 1/2. im like 6'0 and about 130lbs, i know tall skinny and lanky, it is wat i
I want to find a team to make the lightest, relatively durable, and supportive boot/binding system. I think I have the boots picked. Now I need manufacturing and tech support. Any input will be gre
...ard past the board. this sucks for putting in a bag for transport, and for overall coolness. ...but the bindings match my Special Edition Rome perfectly....
I have a Burton Custom binding that cracked apart on the think plastic base that wraps around the back of your foot, just above the back of the heel. It`s pretty thick plastic, so I think it will g
...ve me the adapter plates to mount the Flows to the Burton board. The guy who usually mates the board and bindings wasn`t in, and I said I thought I could assemble things correctly, but I have a few...
...o have a question if anybody has any advice on the subject. I never really learned much about adjusting my bindings and what is supposed to do what. I can figure out the gist of most of it like the bo...
what is the difference between hard and soft bindings?? which are better for what??
Anyone have experience with these bindings and their `adjustable response ankle straps` design? I love my Northwave boots, but after two seasons I`m starting to get heel lift problems. Is the Nike s
... only am going to try this because I want to spend time with my son. A chum has several used board and binding setups that I can chose from to get me started. The boards are about the same siz...
my old Clicker bindings with my HB boots. On Saturday, in a pissing rain on top of a couple inches of new snow, they felt fine, and I was thinking that maybe I would be OK. Sunday was a different st
... story... So, what is the easiest set of straps to attach/remove? So far I like the look of Ride SPi bindings, but haven`t demo`d them. Thanks! -t...
I have been riding alpine boards with hard bindings for couple of years. Regular bindings i.e. composite or metal +composite bindings can`t stand the torque in the long run and tend to break or twi
...nd what kind of hole insert pattern it has? my friend bought this board but the problem is that the newer bindings can't mount to this pattern so he's stuck with it. just trying to get some info on ...
... HILL FAST WITH QUICK TURNS,WILL A WIDE BOARD MAKE IT HARDER TO NEGOTIATE TURNS? ALSO I JUST BOUGHT NEW BINDINGS WITH TOE RAMPS,WILL THAT HELP IN TURNING ANY?AND FINALLY I WAS TOLD THAT WIDER BOAR...
...lways get a lot of heel movement. In order to have good control over the board I then need to tighten my bindings really tight which kills my feet very soon. I tried a pair of Salomon Malamutes whi...
... I saw a pair of used Burton MGX Megaflex hardboots recently and have a few questions: 1. What sort of bindings do these use?...
Page: 123

Copyright © 2006 - Dec 2008 Snowboard Gang