My Profile

Keep Up to Date:
Blog RSS
Blog
Forum RSS
Forum

boot

...h when I bought my board, just length and I ended up buying a board with a width of 250. I wear size 11 boots and when I strap in my boots overhang on both the heel and toe side. I have my bindings...
... angles (15/7ish)..what would considered the desired minimum board width be for a size 10.5 mens (usa) boot? (2000 Ride Rulers). The boots seem to be slightly bigger physically than the average size...
...'9 and i weigh 145 pounds. would their be a large problem if the board is 155? and also i found that my boots are 1.5cm over the edge on both sides, would that create a large toe/heel drag?...
My daughter picked up a pair of 2008 32 vela boots on line. Now that she has them, she realizes they are supposed to be heat fitted. Is it possible to do something on our own? Any idea what temp th
...n I go to find a good deal and get good performance at a fair price, because frankly, $1000+ for board, boots, bindings is pushing it big time. *Found a couple sites that sell these boards, any opinio...
Anyone know if this system is very good? I was looking at a pair and was thinking about getting them but i don`t want to get them if they are more gimmick than practical. Any advice would be appreci
... 5'10" so I think I need a 162ish board. Right? If I have a chance to buy a K2 Fuse with bindings and boots (new with few $ remember?, googles and a helmet for $180 but it is only a 153 does it matt...
...y Worried Ive Just Bought My First Board Burton Blunt 158, Ahm Ive Got A Pair Of Size 11 Rome Libertine Boots And I Just Dont Think There Going To Fit On My Board I Havent Any Bindings As Yet. The Bin...
...t I should get it. On the website, however, I was a little shocked by the prices of the bindings and boots. So I am wondering if there are any decent quality Bindings (yet somewhat cheap-priced) ...
...rea, and a couple times in his back yard when the snow was deep enough. The board is a DBX Dragon, DBX boots, and DBX bindings. I bought the entire package for $50 USD. I tried to do some resea...
...o ride but I haven't since 93 so I am very rusty and behind the times. I recently purchased K2 clicker boots on ebay because they were oh so cheap. I didn't realize that the clicker actually had to ...
...eal on snowboard bags. Costco is carrying a bag called "Bugaboo". Padded, poly lined with a pocket for boots. Max length is 169cm., I think. Great bag but the best part is $27.99. I picked up two a...
... just wanted to know if this was going to be a problem for me. I read that wide boards are for ppl with boot sizes over 10. My boot size is exactly 10. Should I return the board and get something else...
Some dudes seling some Burton Custom bindings, that use the large cloth X strap across the boot. I'm not sure what year it is, but I want some decent bindings, and these are only $45. Good deal? He
...was wondering if I should purchase a wide board or not. My street shoe size is 11 (US) and most of the boots I`ve tried on are either 11 or 11.5 depending on the brand. Most sizing charts I`ve seen ...
I`m buying boots finally after renting last season. I tried on sixteen paris of boots last weekend. I find size 9 1/2s feel a bit cramped in the toebox and seem a bit snug side-to-side, but size 10
...ne of the professional snowboarders use them? .......good point maybe... One deciding factor will be boot comfort as I also need to be able to wear the boots all day without crippling myself (like ...
...r to step-ins. So over the off-season, I bought a nice set of Solomon strap bindings and Burton Driver boots. The Driver`s are supposed to be stiffer and more responsive than the Rulers. Result f...
...eally big feet and for others rather boring to ride? on my old boards i sometimes had problems that my boots hit the snow, it didn?t happen that much, but if it did it was really shitty. so, how i...
...... this will be her first season.. she has awsome balance(learnt to walk at 10months old)I cannot find boots small enough to fit a toddler size 5, the smallest i can find is a 9.5, any suggestion on ...
If anyone in the Toronto area is interested in the above boots, please contact me. I have moved on to carving gear so I`m getting rid of some of my freeride equipment. These boots and bindings were
...e shit out of me, though I was able to stop without a major wreck. I had a bunch of snow jammed in the boot, so I cleared it out, clicked back in, and everything felt stable. I went back up the lif...
I'm looking to buy a pair of soft/medium flex boots. I've only been able to try on the vans encore boa boots and found it quite comfortable with minimal heel lift however no stores around me carry dc
...aw them REI this week. I have a pair of regular superfeet and I like them a lot. However, my snowboard boots fit a lot tighter than my shoes and there is no insole to replace. I`m a little unsure o...
No, the discontinued Marker/DNR/Santa Cruz stepin system are not compatible with any other manufacturers. 2000 was the last year it was made.
...ards the past couple years and now I`ve decided I need to buy my own board. I`m 5`10", 250, size 13 boots so I need a wider board so my boots don`t hang off the edges. I`ve looked online and ive ...
I am looking for a new pair of boots, and I have some old Switch step-ins. I haven`t been snowboarding much in the past few years and have lost touch with the hardware. My Switch bindings were boug
I upgraded my boots and bindings this weekend. Previously I had: Northwave Master (top of line freeride boot), 4 years old; Drake F60 Ltd, 3 years old I`ll do the new boots first. They seem fanta
We need an alpine race carving board for my 11 year old son, plus bindings and hard boots. But the price tag for this new equipment is huge. We just can`t afford new equipment for him, not when he`l
I don`t know, what kind of boots to buy: I am going to buy a splitboard, that one can use for walking up-hill as well. Hard boots that are made for ski touring only have flex in one direction,
Quick question here. I`m thinking of swapping form my Burton SI`s to a hardboot of some kind. I`m not an air guy (And my broken wrist will prove that...) So I`m looking for some advice to swap f
...some of you on this board that have used the Boa cable lacing system available on dc, vans & northwave boots? I am looking for opinions on durability, any failures you`ve experienced, overall comfor...
...oblems: - finding a carving board that is the right weight and flex for him - finding a board (and boots and bindings) that we can afford. Given the prices that we`re seeing for new Alpine carve...
...hard snow I was pathetic and figured I will stay with skis. Anyhow, there is a K2 FatBob board with boots for sale cheap. The boots are my size, so maybe I will give it another chance. The sel...
...where to get Flow Bindings in Canada? The seem pretty rare. I have seen a lot of posts about best boots to go with those bindings. I would not mind some opinons. Are they worth getting? Is...
wats up everyone? i bought a saloman sequences 160 and salomon bindings(large) last season. i got dc boots size 10 or 10 1/2. im like 6'0 and about 130lbs, i know tall skinny and lanky, it is wat i
I want to find a team to make the lightest, relatively durable, and supportive boot/binding system. I think I have the boots picked. Now I need manufacturing and tech support. Any input will be gre
...adjusting my bindings and what is supposed to do what. I can figure out the gist of most of it like the boot size adjustment and such but some things (forgive me for not knowing the proper names) such...
... a few questions (I can go back if I need to): 1. I bought XL size Flows. I have size 10 K2 Corsair boots which I took into the shop to get the proper binding fit. Upon inspecting the bindings a...
...xperience with these bindings and their `adjustable response ankle straps` design? I love my Northwave boots, but after two seasons I`m starting to get heel lift problems. Is the Nike system effecti...
...does it even make a difference? I just need something to start and figured I would put more $ into the boots to start with. I have to make up my fast before they are gone!...
my old Clicker bindings with my HB boots. On Saturday, in a pissing rain on top of a couple inches of new snow, they felt fine, and I was thinking that maybe I would be OK. Sunday was a different st
I have a questions about how boots are supposed to fit. I was at the snowboard shop in my town yesterday and salesperson was telling me that my toes should be right up against the inside of the boot.
I`ve got size 12 (UK) feet, but not very wide feet. Any recommendations on suitable boots / brands for skinny feet. I tried on the Salomon malamute`s yesterday and they felt really good but they
I`ve been struggling to find good boots so any recommendations would be welcome. The problem is that my ankle is fairly narrow so I always get a lot of heel movement. In order to have good control o
...oking to outfit my daughter with a snowboarding package. I saw a pair of used Burton MGX Megaflex hardboots recently and have a few questions: 1. What sort of bindings do these use?...
...ng carried away here, one frosty day in Scotchland 6 weeks ago and I think I`m JP. God I love snow, my boots, my board. I love everyone`s boots - your boots are lovely. Feck - 18 days and I`m on cam...
...rd, so i can carve and go to hlaf-pipe. What should i take? how long and wide? which type of bindings/boots to you sugest are best, how should i set up my board(regular style) what angles, which ...
...but it just is not as nice as having one of those foldout versions that you get at the lifts or ticket booths. Has anyone tried to call the resorts directly and see if they can mail those out to pe...
...ough I spent more time getting up from falling than anything else. Yesterday I bought a board/bindings/boots. I need to know how to take care of my board, Im only in Michigan for a month while school...
Page: 123

Copyright © 2006 - Dec 2008 Snowboard Gang