Profile
Subscribe
Purchasing a used board is a great way to start out! There are often boards out there that may be a few seasons old but have barely been ridden! Just like a car… a board with a low mileage is a great buy!
Here are a few basic rules to follow when purchasing a used board:
Delaminating - If you can see that the layers of the board are separating, then stay away! This is not a good buy.
Inserts - Always check that all inserts are there and the threads are in good shape. If the inserts are missing, do not buy!
Edges - Make sure the edges are not bent and that they do not separate. Check that the board is smooth without deep burrs. Do not worry about a dull edge as this can always be sharpened.
Top sheet - Cracks or spider webs around the binding area are always problem signs that scream, stay away. Most scratches are not critical and it is up to you to decide what you are willing to tolerate.
Base - Look for deep gauges in the board base that cut all the way to the wood. These are called core shots. Your local shop may be able to repair them, so this is definitely a price issue. Most other scratches can be scraped off at your local shop as well.
Flex - Does the board still have flex? Does it feel nice and have Pop, or is it mushy. Lay the board on a flat surface and make sure there is a slight gap between the surface and the board’s waist.
Manufacturer - Buying form a known brand usually means the quality is good. If the model is relatively new it might even be under the warranty form the company. You will always have a reputable address for repairs if needed.
